Wire Mesh Container — Foldable, Stackable Steel Cages for Automotive, Manufacturing & Recycling
The universal steel-mesh cage for automotive OEMs, tier-1 parts suppliers, e-commerce fulfilment, retail returns and recycling operations. Foldable 4-sided mesh cages that stack 4-high loaded, fold flat when empty for return-freight economics. AME Rack manufactures 1,000–1,500 kg capacity, ISO 3394 pallet-footprint compatible, exported to 65+ countries.
The Foldable Steel Mesh Cage That Replaced the Wood Pallet Box
A wire mesh container (also called wire mesh pallet, foldable wire container, stackable mesh cage, steel storage cage, collapsible wire basket, galvanized wire container, industrial mesh crate or KLT mesh box) is a welded steel-wire bin used as a returnable, stackable shipping and storage unit across automotive, e-commerce, recycling and 3PL logistics.
The core engineering trick is the hinged 4-side wall design: walls fold inward when empty, reducing the volume by 75%. Three full containers fold into the footprint of one assembled unit — turning the return-leg of a closed-loop logistics chain from a cost center into a fraction of its original spend.
Construction is a welded mesh of 4–6 mm cold-drawn steel wire on a 50×100 mm or 50×50 mm grid, mounted on a tubular or U-channel steel base with 4-way forklift entries and corner stack feet. A hinged half-drop front gate (visible in our hero image) lets pickers reach the bottom without unstacking — the single biggest productivity gain vs solid pallet boxes.
AME Rack manufactures wire mesh containers compliant with EN 13626 (steel pallet boxes), DIN 15155, AS 4084 and JIS Z 0601, with mill test certificates and load-test reports issued free with every project.
Why Wire Mesh Containers Beat Wood Pallet Boxes & Plastic Bins
Eight reasons returnable wire mesh containers have become the default closed-loop shipping unit across automotive OEM, e-commerce reverse logistics, recycling and 3PL operations.
100% Visible Inventory
Mesh walls let pickers and auditors see contents from any side — no opening, no labelling errors, faster cycle counts.
Folds Flat -75% Volume
4-side hinged walls collapse inward in 5 seconds. 3 folded containers occupy the same footprint as 1 assembled — return-leg shipping cost drops 60-75%.
Stack 4 High Loaded
Corner stack feet self-locate into the unit below. Stack 4 high loaded (8 high empty), saving floor space without any rack investment.
Half-Drop Gate Access
Hinged front gate drops to mid-height — pickers reach the bottom without unstacking. Critical for FIFO automotive line-side replenishment.
Galvanized Corrosion Resistance
Electro-galvanized 8–15 μm (indoor) or HDG 60–90 μm (outdoor / cold-chain). 5-year corrosion warranty on HDG configurations.
AGV / AS-RS Compatible
Standard footprints (800×1200, 1000×1200, 1200×1000 mm) match Euro / ISO pallet rails — drop-in compatible with AGV decks, conveyors and AS-RS shuttles.
Returnable / Closed-Loop
10-year service life with 200+ trip cycles — vs single-use cardboard or wood crates. ROI typically in 6–18 shipments for closed-loop OEM-supplier logistics.
Globally Shipped
Exported to 65+ countries; FOB / CIF / DDP all supported. 240 folded units fit a 40HQ container — best cost-per-unit in the industry.
3 Configurations of Wire Mesh Container
Wire mesh containers are one base architecture with three widely-deployed variants. Pick the version that matches your load weight, mobility requirement and handling environment.
Collapsible Wire Container
Foldable mesh walls drop flat for return logistics — reduces empty-trip volume by up to 75%. Electro-galvanized finish, half-drop front gate, 500–1,000 kg load capacity. Standard 800×600 / 1000×800mm footprints available.
Wire Container with Wheels
4-castor base (Ø125–150mm, 2 swivel + 2 fixed or all-swivel with brake) for floor-level manual movement without forklift. Powder-coat or electro-galvanized finish, 300–600 kg capacity, half-drop or full-drop gate options.
Traction Wire Container
Reinforced frame with tow hitch / draw-bar coupling for tugger-train and tractor towing across large factory or DC floors. 6mm wire grid, 1,000–2,000 kg capacity, heavy-gauge base runners, optional lid. HDG finish for outdoor / yard use.
Full Wire Mesh Container Specification Matrix
Three production-default configurations covering collapsible, wheeled and traction variants. All values verified by stamped FEA report (EN 13626 / DIN 15155) — request full PDF datasheet with your quote.
| Specification | Collapsible Wire Container | Wire Container with Wheels | Traction Wire Container |
|---|---|---|---|
| External dimensions (L×W×H) | 800×600 / 1000×800 mm, H 840 mm | 800×600 / 1000×800 mm, H 840 mm | 1200×1000 / 1400×1000 mm, H 890 mm |
| Internal capacity | 0.35–0.55 m³ | 0.35–0.55 m³ | 0.95–1.20 m³ |
| Static load capacity | 500–1,000 kg | 500–1000 kg | 1,000–2,000 kg |
| Stack height (loaded) | 4 high | Not stackable (castors) | 3 high (with lid) |
| Wire diameter (vertical / horizontal) | 4 / 5 mm | 4 / 4 mm | 6 / 8 mm |
| Mesh grid | 50×100 mm | 50×100 mm | 50×50 mm |
| Base frame | 40×40×2.0 mm tube | 40×40×2.0 mm tube + castor plate | 60×40×3.0 mm U-channel + runners |
| Mobility | Forklift 4-way entry | 4× Ø125–150mm castors (2 swivel + 2 fixed or all-swivel w/ brake) | Tow hitch / draw-bar coupling for tugger train |
| Gate type | Half-drop front gate | Half-drop or full-drop gate | Full-drop gate, optional lid |
| Surface finish | EG 8–12 μm | Powder coat 60–80 μm over zinc primer | HDG 60–90 μm per ISO 1461 |
| Foldable | Yes (−75% volume) | Yes (−70% volume) | Optional (−65% volume) |
| Empty weight | 28–42 kg | 32–48 kg | 65–95 kg |
| Standard compliance | EN 13626 · DIN 15155 | EN 13626 · EN 13382 (castors) | EN 13626 · ISO 1461 HDG |
| 40HQ container (folded) | ~260–280 units | ~220–240 units | ~160–180 units |
| Typical applications | E-commerce returns, automotive parts, 3PL circuits | Retail back-room, hospital linen, light manufacturing | Tugger-train assembly lines, yard logistics, foundry |
10 Engineered Parts of a Wire Mesh Container
Every wire mesh container we ship is built from the same 10-part architecture — designed for repairability, returnability and 10+ year service life in closed-loop logistics.
Welded Steel Wire Mesh Panel
4–6mm cold-drawn steel wire on 50×50 or 50×100mm grid, robot-welded at every intersection — 350+ welds per panel.
Hinged Half-Drop Front Gate
Front mesh wall hinges at mid-height — opens 180° for full access, drops 50% for picking without unstacking.
Spring-Lock Gate Latch
Self-engaging spring latch on both sides of the front gate — secures contents during transport, releases with one-hand operation.
Corner Stack Feet
4 cast steel feet self-locate into the unit below — enables 4-high loaded stacking without rack or strap. Replaceable with M16 bolts.
Tubular / U-Channel Base
40×40 to 60×40mm steel tube or U-channel base — supports forklift entry on all 4 sides, transfers stack load to feet.
4-Way Forklift Pockets
Standard 220×85mm pockets at 760mm centres — accept any counterbalance or reach truck without adapter.
Side-Wall Hinge Pins
Stainless steel hinge pins at base joints allow side walls to fold inward in 5 seconds without tools.
Identification Plate Holder
A4 or A5 acrylic / steel plate mount on front gate — barcode label, part number, batch info. Critical for VDA 4500 / KLT compliance.
Optional Plastic Liner
Corrugated plastic insert protects small / sharp / oily parts from falling through mesh. Snap-in, washable, reusable.
Surface Finish
Standard: electro-galvanized 8–15 μm. Outdoor: HDG 60–90 μm per ISO 1461. OEM: powder coat over zinc primer (any RAL colour).
8 Industries Running on Wire Mesh Containers
Eight industries where wire mesh containers deliver measurable cost savings — wherever closed-loop logistics, visible inventory, returnable packaging or stack-flat storage matters more than single-use simplicity.
Automotive Line-Side
Engine blocks, transmission cases, brake assemblies — Tier 1/2 supplier to OEM closed-loop logistics. VDA 4500 SLC standard footprint.
E-Commerce Returns
Reverse-logistics consolidation for returned parcels — visible inventory speeds sortation by 3–5×. Foldable for empty back-haul.
Recycling / Scrap Metal
Copper wire, aluminum cans, steel turnings, e-waste collection — HDG finish survives outdoor scrap yards 10+ years.
Foundry & Castings
Cast iron parts, machined castings, raw blanks — heavy-duty 1500–2000 kg variants with 6mm wire and U-channel base.
Food Processing & Cold Chain
Plastic-base hybrid containers for poultry processing, vegetable washing, frozen storage — HACCP-compliant, food-contact safe.
Retail / Bulk Storage
In-store bulk display for hardware, gardening, building materials — visible product, lockable gate, brandable powder coat finish.
Pharma & Medical Logistics
Returnable medical device cages — powder coat finish, RFID tag mount, batch traceability. GDP-compliant cleanroom support areas.
Marine / Offshore Logistics
Salt-spray resistant HDG containers for offshore equipment, ship spare parts, port handling. ISO 1461 corrosion warranty.
How to Spec a Wire Mesh Container Fleet in 3 Decisions
Three decisions decide whether your wire mesh container fleet pays back in 6 shipments or 60. Work through them before requesting your quote — they prevent ~90% of mid-deployment respec changes.
Footprint: Euro, ISO or Auto-Custom?
Your container footprint must match your downstream rack pitch, AGV deck and conveyor width. Wrong footprint = stranded asset.
- 800×1200 mm — Euro pallet footprint (EU general logistics)
- 1000×1200 mm — ISO pallet (NA / Asia general logistics)
- 1200×1000 mm — VDA 4500 SLC (EU automotive)
- 1200×800 mm — EUR-LP automotive line-side
- Custom — Cleanroom or non-standard equipment
Finish: EG, HDG or Powder Coat?
Surface finish drives both lifecycle cost and corrosion warranty. Don't overpay for HDG on indoor fleets — and don't try to save with EG outdoors.
- Electro-galvanized 8–15 μm — Indoor only, 3–5 yr life
- Hot-dip galvanized 60–90 μm — Outdoor / cold-chain, 10+ yr life
- Powder coat over zinc — OEM brand colour, cleanroom, 7+ yr life
- 304 stainless — Pharma / food-contact, 15+ yr life
Gate Type: Fixed, Half-Drop or Full-Drop?
Gate design controls picking ergonomics. The wrong gate adds 3–8 seconds per pick — at 1000 picks/day this is a full operator-shift wasted per week.
- Fixed wall — Lowest cost, fork-tip access only
- Half-drop gate — Default; access without unstacking
- Full-drop gate — Floor-level access, max ergonomic
- Split-door (2-piece) — Wide cage variants 1200mm+
| Selection Criteria | EG Indoor | HDG Outdoor | Powder Coat OEM | 304 Stainless Pharma |
|---|---|---|---|---|
| Best for use case | Indoor automotive / e-com | Outdoor scrap, marine, cold | OEM branded fleet | Pharma / food-contact |
| Corrosion life | 3–5 years indoor | 10+ years outdoor | 7+ years indoor | 15+ years any |
| Cost index (vs EG) | 1.0× (baseline) | 1.5× | 1.7× | 3.5× |
| Salt-spray resistance | 120 hours | 1,500+ hours | 800 hours | Indefinite |
| Branding (colour) | No (silver only) | No (matte grey) | Any RAL colour | No (mirror finish) |
| Food-contact compliant | No | No | FDA-grade option | Yes — FDA / EU 1935 |
| Cold-chain (-30°C) | Marginal | Yes | Yes (low-temp paint) | Yes |
| Warranty (corrosion) | 1 year | 5 years | 3 years | 10 years |
Wire Mesh Container vs. Wood Pallet Box · Plastic Bin · Steel Bin · Cardboard Gaylord
Where the wire mesh container wins, where alternatives win. Use this matrix to defend your spec internally — every row reflects what a real procurement manager asks.
| Criteria | Wire Mesh Container | Wood Pallet Box | Plastic Bin (HDPE) | Solid Steel Bin | Cardboard Gaylord |
|---|---|---|---|---|---|
| Service life (trips) | 200+ trips · 10 yrs | 15–25 trips · 2 yrs | 80–150 trips · 5 yrs | 300+ trips · 12 yrs | 1–3 trips · single-use |
| Foldable / collapsible | Yes — folds -75% | No (fixed box) | Some types | No | Yes (folds flat) |
| Visible inventory | ★★★★★ | ★★★★★ | ★★★★★ | ★★★★★ | ★★★★★ |
| Stack height (loaded) | 4 high | 2–3 high | 3 high | 4–5 high | 2 high max |
| Cost per unit (USD) | $45–180 | $80–150 | $120–350 | $200–500 | $8–18 |
| Cost per trip (10-yr fleet) | $0.45 lowest | $5.30 | $2.10 | $1.70 | $12.00 |
| Repair / part swap | Easy (bolt-on parts) | Difficult (full replace) | Difficult (mold parts) | Weld repair | Not repairable |
| Wash / sterilise | Yes — high-pressure | No (porous wood) | Yes (limited heat) | Yes | No (single-use) |
| Outdoor / cold-chain | Yes (HDG variant) | No (rots, freezes) | Yes | Yes (HDG required) | No (water damages) |
| Container loading (40HQ) | ~240 folded | ~80 assembled | ~100 assembled | ~70 assembled | ~600 flat-pack |
| ISPM-15 / phyto issue | None (steel) | YES — fumigation | None | None | None |
| Best use case | Returnable closed-loop | One-way export | Wash-down / food | Permanent in-plant | One-way recycling |
⭐ AME Rack's Honest Verdict
Pick wire mesh containers when you need returnable, visible-inventory, fold-flat closed-loop logistics — automotive OEM-supplier, e-commerce reverse logistics, 3PL pool fleets, scrap recycling. Stay with wood pallet boxes when the shipment is one-way export under USD 80/unit (cheaper than freight-back). Plastic bins beat mesh on wash-down food processing and pharma cleanroom. Solid steel bins win on permanent in-plant work-in-progress where visibility doesn't matter. Cardboard gaylords only win on single-use one-way recycling where lowest possible CapEx is the only criterion.
3 International Wire Mesh Container Projects by AME Rack
Real customers, real freight and cycle KPIs. From a Guangzhou automotive parts supplier to a Chennai electronics OEM and a Ho Chi Minh City e-commerce 3PL — foldable steel cages that stack loaded, fold flat empty and cut return-leg cube by up to 75%.
Parts supplier delivered components in wooden crates that were being discarded after each cycle — high crate cost plus damaged parts from crate flex. OEM required a durable returnable cage system for line-side delivery.
240 standard foldable wire mesh cages, 1,000 kg capacity, ISO 3394 pallet-footprint compatible. Powder-coat 60 μm finish, 4-high stacked loaded on the truck for outbound delivery.
Crate cost eliminated in the 12 months since deployment. Parts damage cut by around 80% due to rigid steel-mesh containment. Supplier standardised on foldable cages for all OEM accounts.
Electronics OEM used hand-pushed carts and stacked cardboard trays between the stores and 8 assembly cells. Component contamination and forklift handling delays were bottlenecking the production line.
180 castor-mounted foldable wire cages with Ø150 mm polyurethane wheels — hand-pushable line-side, foldable for storage. Half-drop door for easy line-side access, 800 kg capacity.
Line-side kitting time cut by around 40% via direct roll-in. Component contamination eliminated. OEM added positions for a second production hall in Year 2.
Regional 3PL ran daily pool trucks between HCMC and 3 regional hubs — outbound full but return-leg trucks were coming back empty with rigid cages taking up full trailer volume, doubling freight cost per cycle.
420 foldable wire mesh cages, 1,200 kg capacity, folds flat to 200 mm high in 10 seconds. 4-side hinged panels + half-drop door. Return-leg trucks now carry 4× the folded cages per load vs a rigid alternative.
Return-leg cube cut by around 75%. Freight cost per cycle dropped by roughly 32%. Pool fleet expanded to a 4th hub in Year 2 using the same cage inventory.
7-Stage Manufacturing & Quality Pipeline for Wire Mesh Containers
Every wire mesh container leaves our Dongguan factory through a 7-stage production line built around mill-certified wire, robotic resistance welding, in-line fold-cycle testing and full-container loading verification.
Steel Wire Inbound
Cold-drawn low-carbon steel wire (SAE 1006 / 1008) sourced from Baosteel & Hesteel — 4–8mm diameter. Every coil arrives with mill test certificate (yield strength, elongation, chemistry); AME QC re-tests random samples per ISO 16120-2.
CNC Wire Cutting & Straightening
CNC wire straightener-cutter holds length tolerance ±0.5mm per panel. Horizontal and vertical wires pre-bent to grid spacing on automated jig.
Robotic Mesh Welding
Multi-head Panasonic robotic resistance welder welds 350+ intersections per panel — full-penetration cross welds tested per ISO 17636. Output: 4 mesh panels/minute at 100% weld coverage.
Base Frame Fabrication
Q235B steel tube or U-channel laser-cut (±0.2mm) and robot-welded into the base frame. Forklift pockets and corner-foot weldments fitted before surface prep — every base load-tested with 1.5× rated payload.
Hinged Assembly & Test
Side walls assembled with stainless steel hinge pins; gate fitted with spring-lock latches. Each unit fold-cycle tested 50× and load-tested at 1.5× rated capacity (24 h hold, deflection ≤ L/200) before paint.
Surface Treatment
7-stage pre-treatment (degrease → rinse → phosphate → rinse → passivate → rinse → dry). Standard: electro-galvanized 8–15 μm. Outdoor: hot-dip galvanized 60–90 μm per ISO 1461. OEM: powder coat 60–80 μm over zinc primer.
Final QC & Container Loading
100% inspection: dimensional check, weld coverage, paint adhesion (cross-hatch ASTM D3359), corrosion sample (salt spray ISO 9227). Containers pre-folded for max density (~240 units/40HQ). Photo + video proof-of-loading sent before vessel sails.
How to Buy Wire Mesh Containers — A 6-Point Importer Checklist
Six things every importer, distributor and OEM warehouse owner should validate before placing a wire mesh container PO. These are the questions our top customers always ask.
📋 1. Specification Confirmation
- External + internal dimensions (L × W × H, mm)
- Wire diameter (vertical / horizontal) and mesh grid (50×50 or 50×100)
- Static load capacity AND stack height (loaded)
- Base frame: tube or U-channel; thickness 2.0–3.0mm
- Gate type: fixed / half-drop / full-drop / split
- Surface finish in μm (EG / HDG / powder coat / 304 SS)
🛡️ 2. Compliance & Test Reports
- EN 13626 (steel pallet boxes) compliance certificate
- DIN 15155 / AS 4084 load-test report
- ISO 1461 HDG coating certificate (if outdoor)
- Salt spray ISO 9227 test report (corrosion warranty)
- Mill test certificate (MTC) for steel wire
- VDA 4500 SLC certificate (for automotive)
📐 3. Sample Order Strategy
- Request 1–2 sample units before bulk PO (DHL/UPS air)
- Validate fold/unfold cycle ≥ 50× on your floor
- Forklift pocket dimensions match your truck (typ. 220×85mm)
- Verify paint adhesion (cross-hatch ASTM D3359 tape test)
- Stack-test 4 high on YOUR concrete floor
💰 4. Payment & Incoterms
- T/T 30% deposit + 70% before B/L (standard)
- L/C at sight accepted for orders ≥ USD 30,000
- Incoterms: FOB Shenzhen (default), CIF, DDP available
- OA 30–60 days for repeat customers after 3 successful POs
- Western Union accepted for samples ≤ USD 2,000
🚢 5. Logistics & Container Loading
- 40HQ holds ~280 standard / ~220 heavy / ~200 HDG units (folded)
- Pre-folded packing for max density — saves 60% freight vs assembled
- IPPC ISPM-15 wood pallets (or paperboard sleeves)
- Container loading photo + video sent before sailing
- Lead time: 15 days standard, 20 days HDG, 25 days OEM-branded
🤝 6. After-Sales & Warranty
- 3-year structural warranty (5 years on HDG outdoor)
- Free replacement parts in 1st year for manufacturing defects
- Damage-in-transit claim support with photo evidence
- Fold-unfold instruction video included in container
- Dedicated account manager (WhatsApp / Email / WeChat)
Everything Importers, OEMs & 3PL Operators Ask About Wire Mesh Containers
Real questions from procurement managers, importers and supply-chain managers during 24 months of wire mesh container export quotes. Bookmark this — it answers ~95% of pre-order objections.
Q01. What is the typical lead time for wire mesh containers?
15 days for standard electro-galvanized units; 20 days for HDG outdoor; 25 days for OEM-branded powder coat (RAL colour match). Express 10-day production possible for repeat customers with stock components.
Q02. What is the MOQ (Minimum Order Quantity)?
Standard MOQ is 50 units per configuration. For first orders we accept 20 units mixed to let distributors trial multiple variants. Sample 1–2 units shipped by DHL/UPS air for paid evaluation.
Q03. How many wire mesh containers fit in a 40HQ container?
Folded: ~280 standard 800×1000mm, ~220 heavy-duty 1000×1200mm, ~200 HDG outdoor units. Always order folded — saves 60% freight vs assembled. Photo + video proof-of-loading sent before vessel sails.
Q04. What is the difference between EG, HDG and powder coat finishes?
EG (electro-galvanized 8–15 μm) — indoor only, 3–5 yr life, lowest cost. HDG (hot-dip galvanized 60–90 μm) — outdoor / cold-chain, 10+ yr life, +50% cost. Powder coat over zinc — OEM brand colour, cleanroom, 7+ yr life, +70% cost.
Q05. Can wire mesh containers be stacked 4 high when loaded?
Yes — 4 high loaded is the standard rating for 500–1500 kg variants. The bottom unit also carries the cumulative weight above (4× payload), which is engineered into wire diameter and base channel sizing. For 2000 kg variants we recommend 3 high max.
Q06. Do wire mesh containers fold flat? By how much?
Yes — 4-side hinged walls fold inward in 5 seconds. Standard volume reduction is 75% (3 folded units = 1 assembled footprint). HDG / heavy-duty variants fold 70%. All folding is tool-free and one-operator.
Q07. Are wire mesh containers compatible with AGV / AS-RS systems?
Yes — Euro footprint 800×1200mm and ISO 1000×1200mm versions match standard AGV deck rails and AS-RS shuttle interfaces. Custom dimensions available for non-standard automation (specify equipment make & model at quote stage).
Q08. What is the corrosion warranty?
EG indoor: 1 year. HDG outdoor: 5 years (covered by ISO 1461 spec). Powder coat OEM: 3 years. 304 stainless: 10 years. Warranty covers corrosion-through; excludes damage from chemical exposure outside the rated environment.
Q09. Can the gate be specified as full-drop or split-door?
Yes — half-drop is standard, but full-drop (floor-level access) and split-door (2-piece for 1200mm+ wide cages) are available at +10–15% upcharge. Specify ergonomic requirement at quote stage.
Q10. Do you offer OEM / private label / brand colour?
Yes — minimum 200 units per configuration. We apply RAL-matched powder coat (any colour), silkscreen or sticker logo, branded packaging, white-label test reports. Used by ~50 automotive Tier 1 and 3PL brands.
Q11. Are wire mesh containers food-contact / pharma compliant?
Standard EG units are NOT food-contact. For food / pharma applications order: 304 stainless (FDA / EU 1935 compliant), or plastic-base hybrid (steel mesh walls + HDPE base). Powder coat FDA-grade option also available.
Q12. What standards do AME Rack wire mesh containers comply with?
EN 13626 (European steel pallet boxes), DIN 15155 (German storage cages), AS 4084 (Australian racking), VDA 4500 SLC (German automotive), EUR-LP, JIS Z 0601, ISO 1461 (HDG), ISO 9001 / 14001 factory certs.
Q13. How does AME Rack price compare to local suppliers?
Wire mesh containers are weight-driven products — our FOB Shenzhen pricing typically lands at 40–60% of EU/US/AU manufacturer pricing, even after shipping and 5–10% import duty. The economics work best for 1×40HQ or larger orders.
Q14. Can wire mesh containers handle cold storage / freezer use?
Yes — order the HDG variant with Q345B low-temp impact steel (Charpy V-notch tested at -30°C). HDG finish handles condensation cycle in freezer doorways. Operating range -30°C to +60°C.
Q15. What payment terms do you accept?
Standard: 30% T/T deposit + 70% before B/L. L/C at sight for orders ≥ USD 30,000. Western Union for samples ≤ USD 2,000. After 3 successful POs, repeat customers can negotiate OA 30–60 days subject to credit check.
Get a Wire Mesh Container Quote in 4 Hours — From the Factory That Ships 65+ Countries
Send your spec (footprint / capacity / stack height / gate type / finish / quantity / destination port) — we reply within 4 hours during Shenzhen business day with FOB pricing, container loading plan, and lead time. Free engineering review. Free load-test report. Free packing list.
📩 3 Ways to Start the Conversation
📧 Lily@amerack.com
💬 WhatsApp / Phone: +86 188 2453 7792
🏭 Dongguan, Guangdong, China · MON–SAT 09:00–18:00 (GMT+8)
